Hammer Home | SSM8 Diagram | SSM8 Parameters

SSM8 Parameters

Parameters for SSM8
Air Consumption (CFM) Air Consumption (M3/Min)
Choke Size PSI Choke Size Bars
150 200 250

300

350 10.3 13.8 17.2 20.7 24.1
Solid 425 605 785 955 1125 Solid 12.0 17.1 22.1 26.9 31.7
1/8" 450 635 825 1005 1185 3.2mm 12.7 17.9 23.3 28.3 33.4
1/4" 505 695 925 1125 1330 6.4mm 14.2 19.6 26.1 31.7 37.5
3/8" 620 865 1100 1325 1545 9.5mm 17.5 24.4 31.0 37.4 43.6
1/2" 805 1075 1335 1600 1880 12.7mm 22.7 30.3 37.6 45.0 53.0
Minimum Recommended Weight on Bit
PSI Bars
150 200 250 300 350 10.3 13.8 17.2 20.7 24.1
lbs 3050 4075 5100 6100 7100 kg 1385 1850 2315 2770 3225
Recommended PRM
Formation
Soft Medium Hard
35 25 Under 20

Minimum recommended oil additions: 3 qts or liters per hour
Water injection recommendations: 4-6 GPM
Standard thread: 41/2" API Regular Pin
Approximate shipping weight: 385 lbs | 175 kg
Standard O.D.: 63/4" | 172mm
Bit reange: 7 1/2" - 12" | 191mm - 305mm


Bruce Tool Company | PO Box 26052 | Greenville, SC 29616 USA
Phone (864) 268-3604 | Toll Free (888) 356-3216
Fax (864) 292-8291
E-mail: tools@brucetool.com
Site programmed by:
KlingmanDesign.com

© 2009
All Rights Reserved