Bruce Tool Company Home

Hammer Home | D6WM Diagram | D6WM Parameters

D6WM Parameters

Parameters for D6WM
Air Consumption (CFM)								Air Consumption (M3/Min)
Choke Size	PSI						Choke Size			Bars
	150	200	250	300	350					10.3	13.8	17.2	20.7	24.1
Solid	400	550	710	860	1025		Solid			11.3	15.6	20.1	24.3	29.0
1/8"	425	580	745	910	1080		3.2mm			12.0	16.4	21.1	25.8	30.6
1/4"	480	645	850	1030	1225		6.4mm			13.6	18.3	24.0	29.1	34.7
5/16"	545	735	935	1130	1335		8.0mm			15.4	20.8	26.5	32.0	37.8
3/8"	595	810	1025	1230	1440		9.5mm			16.8	22.9	29.0	34.8	40.8

Minimum Recommended Weight on Bit

PSI							Bars
	150	200	250	300	350					10.3	13.8	17.2	20.7	24.1
lbs	2000	2600	3300	4000	4600		kg			910	1185	1500	1820	2090

			Recommended PRM
			Formation
			Soft			Medium			Hard
			45			35			Under 20


Minimum recommended oil additions: 2-3 qts or liters per hour Water injection recommendations: 2-5 gallons per minute Standard thread: 3 1/2" API Regular Pin Approximate shipping weight: 265 lbs \| 120 kg Standard O.D.: 5 7/16" \| 138mm Bit range: 6" - 8 1/2" \| 152mm - 216mm

Bruce Tool Company | PO Box 26052 | Greenville, SC 29616 USA
Phone (864) 268-3604 | Toll Free (888) 356-3216
Fax (864) 292-8291
E-mail: tools@brucetool.com